Packing lists and bills of lading without retyping
Most of a packing list or bill of lading is already in your ERP. What the federal rule asks for, which fields software can fill, which ones only the dock knows, what stays with a trained person, and how to test it in two weeks.

In brief
Most of a packing list and a bill of lading is already in your ERP: who it's going to, where, which items, how many. Software can fill those fields from the order and pull in the rest as the dock enters it, so nobody retypes the same address three times. What software can't know on its own is what actually happened on the dock: the real count, pallets, weight and any short ship. Keep a person on those, on freight class changes, and on anything hazardous.
- Most of a packing list or bill of lading is already in your ERP. Retyping it adds risk and no information.
- 49 CFR 373.101 lists five kinds of information for a carrier's bill of lading. Some come from the order, and some only the dock knows.
- Since the NMFC changes of July 19, 2025, many freight classes depend on density, so weights and dimensions need to be exact.
- Let order facts flow. Have the dock enter freight facts once. Keep a person on counts, hazmat, class setup and short ships.
- Start by counting retyped fields and logging paperwork problems for two weeks.
The same facts, typed again
Picture the end of a shipping day. An order is picked. Someone prints a packing list from the ERP. Someone else opens a carrier's website or a blank form and types the bill of lading: ship-to address, PO number, description, piece count, weight. Then the driver is at the door, and a typo in that form goes out with the freight.
Almost none of that typing is new information. The customer's name, the address, the PO and the items were entered when the order came in. If the order itself was retyped from a PDF, some of those facts have now been keyed twice.
That's the case for fixing this job. It's rarely anyone's whole day, so it never gets looked at. But it happens on every shipment, usually late in the day, and the mistakes show up later as a wrong delivery or a billing dispute.
What a bill of lading has to say
The federal rule is short. For interstate shipments, 49 CFR 373.101 says a motor carrier must issue a receipt or bill of lading with the names of the shipper and receiver, the origin and destination, the number of packages, a description of the freight, and the weight, volume or measurement when that matters for rating it.
That rule is written for the carrier, not for you. Your carrier's form, your customer's routing guide and your freight terms will all ask for more, such as PO numbers, freight class and who pays. But look at that short list. Three of those items come straight from the order. The other two depend on the dock.
A packing list has no such federal checklist. It's your document, and your customer's receiving team uses it to check the box against the PO. So it has to match what's really in the box, not just what was ordered.
Where each field really comes from
Who knows what on a shipping document
| Field | Where it comes from | Can software fill it? |
|---|---|---|
| Shipper, receiver, addresses | Customer and order records | Yes, if the order's ship-to is right |
| PO number, order number | Sales order | Yes |
| Items and quantity ordered | Sales order lines | Yes |
| Quantity shipped | Pick or shipment posting | Yes, once the pick is confirmed |
| Cartons and pallets | The person who packed it | Only after the dock enters it |
| Weight and dimensions | A scale, a tape, or item data you trust | It can suggest. The dock confirms. |
| Freight class | NMFC rules and your item setup | It can look up what you've set. A person owns the setup. |
| Hazmat description | Your hazmat data and trained staff | Prefill only, with a trained person checking |
The pattern is simple. Facts about the order can flow on their own. Facts about the freight have to be captured once, by whoever is standing next to it, and then reused everywhere.
Why the typing costs more than it looks
We couldn't find a good public study that counts errors on shippers' bills of lading, so we won't quote a number. The closest solid research comes from a different field. A review of 93 studies on clinical research data found a pooled error rate of 6.57% when people read records and copied the data out by hand. That's medical data, not freight. We use it only as a comparison for the same kind of job: read one document, type it into another.
The freight industry says much the same about its own paper. The Digital LTL Council's electronic bill of lading standard exists to replace paper-based steps, and the council lists fewer manual errors and fewer billing disputes among its benefits. Old Dominion Freight Line reports the council's estimate of 2-4% savings per shipment once the standard is fully adopted, and describes a large LTL shipper in commercial printing that cut about $250,000 a year by replacing 700-900 daily manual calls with system connections. Both come from groups promoting the standard, and that case covered more than bills of lading. Treat them as a sign of direction, not as what you'll save.
Facts about the order can flow on their own. Facts about the freight get captured once, by whoever is standing next to it.
Freight class got harder to do from memory
There's a newer reason not to rely on what's in someone's head. On July 19, 2025, the NMFC changes in Docket 2025-1 moved many freight classes from commodity-based to density-based, as Old Dominion explains it. The same page says shippers should review their documents, capture exact weights and dimensions, and update any system that generates a bill of lading. It warns that not following the new items can lead to rate adjustments, clerical fees and disruptions.
If your class is typed from a sticky note or an old template, that's the place to start. Keep it in your item data, have one person own it, and let the document pull from there.
What your ERP may already do
Take Microsoft Dynamics 365 Business Central as an example. It can post picks and shipments four different ways, from the order line up to full warehouse documents. Microsoft's release plan (now archived) also lists an April 2026 date for a feature to email a posted sales shipment to the customer, not just print it. Check that your version has it.
A bill of lading is a different story. Rand Group says Business Central has no native bill of lading report. Rand sells an add-on that does it, so keep that in mind. Microsoft's own bill of lading page we found covers the Russian localization, which fits Rand's point. Other ERPs differ, so check yours and any shipping module you already pay for before you buy anything.
Carriers offer their own route too. Old Dominion's site has a tool to schedule a pickup and create a bill of lading, and the eBOL standard lets a shipping system create, update and delete bills of lading with carriers that support it. That standard is built for LTL, so it won't cover every lane you ship.
What the workflow looks like
- The order is the source. Customer, ship-to, PO and items come from the order. Nobody types them again.
- The dock enters only what it knows. Cartons, pallets, weight and any short ship, on a tablet or a simple screen, once.
- Software fills the documents. The packing list and bill of lading build from those two sources, using the customer's or carrier's format.
- Checks run before printing. Does the shipped quantity match the order? Is the weight far off from what these items usually weigh? Is a required PO or routing field empty? Is an item flagged as hazardous?
- Anything odd goes to a person. The rest are ready for a quick look and a print or send.
- Everything is saved to the order. When someone asks for proof a month later, the documents are attached to the shipment.
Inbound paperwork is the mirror image. A supplier's packing slip arrives, and someone types quantities into a receipt. Software can read the slip and match it to the open PO, as we cover in what intelligent document processing is. Microsoft's list of prebuilt document analyzers names invoices and purchase orders, but we didn't see packing slips or bills of lading on it when we checked, so expect to set those up for your own samples. Someone still has to count the freight. The slip says what the supplier meant to send. A clean receipt then feeds your three-way match.
What stays with a person
- The physical count. Software knows what was ordered and picked. Only someone at the dock knows what's on the pallet.
- Hazardous materials. Under 49 CFR 172.202, the shipping paper for a hazardous material needs its ID number, proper shipping name and hazard class, among other details. Software can prefill those from good data. A trained person should sign off every time.
- Freight class setup. Let the document pull the class. Don't let software pick a new one on its own.
- Short ships and substitutions. Someone needs to decide what to ship and tell the customer.
- Who pays, and special terms. Collect, prepaid or third-party billing should come from the order or a person, never a guess.
Where the other side has a point
- A shipping system may be all you need. If you ship mostly with a few carriers, a shipping or transportation system that connects to your ERP may solve this without any AI. Many of these fields are plain lookups. You only need more when formats vary or the data lives in email and PDFs.
- Low volume may not justify it. Five shipments a day with one careful person may be fine as it is. Fixing a good template could be enough.
- Bad item data gets copied faster. If your weights and classes are wrong in the ERP, automation prints wrong documents with great confidence. Clean those up for your top items first.
- Your people catch things. A good shipping clerk notices an address that looks wrong. Keep that person's eyes on the exceptions, and write down what they check.
How to start
- Count the keystrokes. Sit with your shipping desk for an hour. Mark every field typed on a packing list or bill of lading that already exists somewhere else.
- Pull the problems. For two weeks, log every carrier billing correction, wrong address and customer complaint tied to shipping paperwork.
- Check your item data. Take your 20 most-shipped items. Are the weights and freight classes in the ERP current?
- Look at what you own. Ask your ERP partner and your main carriers what they already offer.
- Start with one lane. Pick one customer or carrier. Fill the documents automatically, have a person check each one, and measure time per shipment before and after. Our guide to measuring office automation ROI shows how.
If the retyping starts earlier, at the order itself, fix that first. Everything downstream gets cleaner. We cover it in automating email and PDF orders.
Common questions
Can you automate bills of lading?
Mostly. Software can fill the shipper, receiver, addresses, PO and items from the order, then add the cartons, pallets and weight the dock enters. A person should check exceptions, and a trained person should check anything hazardous.
What must a bill of lading include?
For interstate motor carrier shipments, 49 CFR 373.101 lists the names of the shipper and receiver, origin and destination, number of packages, description of the freight, and weight, volume or measurement when it applies to rating. Carriers and customers often ask for more.
Does Business Central print a bill of lading?
Rand Group, which sells an add-on for this, says Business Central has no native bill of lading report. Microsoft's own bill of lading page we found covers the Russian localization. Check your version and partner.
Can AI pick the freight class?
We wouldn't let it choose. Keep the class in your item data with one person responsible, and let the document pull it from there. Since the NMFC changes that took effect July 19, 2025, many classes depend on density, so exact weights and dimensions matter more.
What is an eBOL?
An electronic bill of lading. The Digital LTL Council publishes an API standard that lets shippers create, update and delete bills of lading electronically with carriers that support it. It's built for less-than-truckload freight.
Can software read supplier packing slips?
Yes, document-reading software can pull items and quantities and match them to an open PO. Someone still needs to count the freight, because the slip shows what the supplier meant to send.
Is this worth doing at low volume?
Maybe not. At a few shipments a day, a good template and a careful person may be enough. Count typed fields and paperwork problems for two weeks before you decide.
Sources
- 49 CFR 373.101, Motor carrier bills of lading (Cornell LII)
- 49 CFR 172.202, Description of hazardous material on shipping papers (Cornell LII)
- Garza et al., Error Rates of Data Processing Methods in Clinical Research: A Systematic Review and Meta-Analysis (PMC)
- Digital LTL Council, Electronic Bill of Lading (eBOL) API Standard, version 2.1
- Old Dominion Freight Line, Adopting the eBOL API Standard: Top 3 Benefits for Your Business
- Old Dominion Freight Line, NMFTA Resource Page: Navigating the Ongoing NMFC Changes
- Microsoft Learn, Ship items with a warehouse shipment (Business Central), checked Nov. 4, 2026
- Microsoft Learn, Send posted sales shipments and return receipts by email (release plan, archived), checked Nov. 4, 2026
- Microsoft Learn, Bill of Lading in the Russian Version (Business Central), checked Nov. 4, 2026
- Rand Group, How to print bill of lading from Dynamics 365 Business Central (vendor of an add-on)
- Microsoft Learn, Content Understanding prebuilt analyzers, checked Nov. 4, 2026
Three-way match for manufacturers: automating invoice matching
Automating order confirmations and acknowledgments
What intelligent document processing is, in plain English